Before getting behind the wheel, drivers must make sure that a circle check of their vehicle was completed within the previous 24 hours.
This measure came into effect on November 20, 2016.
In brief
The circle check is a sight and sound inspection of the accessible components of a vehicle that makes it possible to:
detect defects as early as possible
quickly notify the owner and operator of any defects detected
prevent the vehicle from being operated when its condition poses a risk of an accident or a breakdown
Important!
Drivers must carry out these inspections safely.
Vehicles subject to a circle check
Vehicles with a gross vehicle weight rating (GVWR) of 4,500 kg or more
Ambulances
Cement mixers
Tank trucks
Fire trucks
Straight-body trucks
Snow removal trucks
Vans
Pickup trucks
Tow trucks
Semi-trailers
Road tractors
Emergency response vehicles
Equipment transport vehicles (compressors, well drills, concrete pumps, cranes mounted on a truck chassis)
Combinations of road vehicles that include at least one vehicle with a GVWR of 4,500 kg or more For example:
A pickup truck with a GVWR of less than 4,500 hitched to a trailer or semi-trailer with a GVWR of 4,500 kg or more
A pickup truck with a GVWR of 4,500 kg or more hitched to a trailer or semi-trailer with a GVWR of less than 4,500 kg
A pickup truck with a GVWR of 4,500 kg or more hitched to a trailer or semi-trailer with a GVWR of 4,500 kg or more (each vehicle in the combination has a GVWR of 4,500 kg or more)
Buses, minibuses and tow trucks (regardless of GVWR) For example:
Motor coaches
Minibuses
School buses
Paratransit minibuses
City buses
Tow trucks (all types)
Road vehicles with a GVWR of less than 4,500 kg transporting dangerous substances and requiring the display of safety marks
Vehicles exempt from the circle check
Tool vehicles
Graders
Loaders
Back hoes
Heavy vehicles required by an emergency service or in the event of a disaster
Farm tractors
Farm machinery (e.g. combine-harvesters)
Farm trailers (e.g. a hay trailer owned by a farmer and used for farming purposes)
Heavy vehicles used by a natural person for personal ends, i.e. other than for commercial or professional purposes (e.g. a truck used to move household belongings)
Straight-body trucks with two or three axles used to:
transport unprocessed farm, forest or fishery products, provided the driver is also the producer
make the return trip, provided the truck is either empty or used to transport products used for farming, forestry or fishery purposes
Drivers’ responsibilities
Before getting behind the wheel, drivers must make sure that a circle check of the vehicle was completed within the previous 24 hours.
The vehicle circle check can be performed by the driver or another person designated by the operator. In the latter case, the operator is accountable for the circle check and the driver can choose to either accept or refuse it.
If the driver accepts the report, he or she makes sure that the circle check is valid (completed within the previous 24 hours) and co-signs the report to acknowledge it. Accepting the report does not render the driver accountable for the circle check, but the driver must keep the report up to date and record any defects observed during the trip.
If the driver refuses the report, he or she must carry out a new circle check.
Buses, minibuses, tow trucks and emergency vehicles
In addition to the rule described above, a driver can co-sign the circle check report completed by the previous driver, even if the latter person is not a person designated by the operator to carry out the circle check.
If the driver accepts the report, he or she makes sure that the circle check is valid (completed within the previous 24 hours) and co-signs the report to acknowledge it. Accepting the report then renders the driver accountable for the circle check carried out by the previous driver, as it was not carried out by a person designated by the operator. The driver must also keep the report up to date and record any defects observed during the trip.
If the driver refuses the report, he or she must carry out a new circle check.
Principal components to inspect during a circle check
Coupling devices
Frame and cargo body
Heater/defroster
Driver controls
Steering
Windshield wiper/washer
Emergency equipment
Headlights and lights
Tires
Doors and other exits
Glass and mirrors
Wheels, hubs and fasteners
Seats
Suspension
Fuel system
Exhaust system
Electric brake system
Hydraulic brake system
Air brake system
Passenger transportation items
Circle check report
The person who carries out the circle check must fill out the report and record his or her observations.
The report must contain the following information:
the vehicle’s licence plate number or the unit number found on the registration certificate
the operator’s name
the date and time at which the circle check was performed
the municipality or location on the road where the circle check was performed
any defects noted during the trip
any defects noted during the circle check (if no defect was noted, this must be indicated as well)
the name of the person who performed the circle check (printed legibly)
a declaration, signed by the driver or the person designated to perform the circle check, attesting that the vehicle was inspected in accordance with applicable requirements
if the driver did not personally perform the circle check, his or signature to attest that he or she read the report and accepted it
the odometer reading.
Electronic format
Although regulatory provisions clearly specify the elements that must be included in a circle check report, nothing specifies the format in which it must be produced. The use of an electronic docu¬ment is thus permitted, but it must meet the requi-rements set forth in the Act to establish a legal framework for information technology. Refer to Appendix 6 – Circle Check Report (PDF, 10.6 Mo) of the Circle Check Guide to find out more.
Lists of defects
The list of defects is a checklist that enumerates the components to inspect and the defects that can be detected on a vehicle. It is used to determine whether defects noted during a circle check are minor or major.
There are three lists of defects that must be used during the circle check.
List 1: Heavy vehicles, other than those covered by lists 2 and 3
List 2: Buses (other than motor coaches), minibuses and trailers hauled by a bus, minibus or motor coach
All persons concerned have a duty to intervene when a vehicle’s mechanical condition presents anomalies. Anomalies that pose an immediate or short-term risk to road safety are considered major or minor defects.
Minor defects
A minor defect does not pose an immediate threat to the safety of the driver or other road users, but can deteriorate quickly in certain cases. A vehicle with a minor defect is prohibited from being operated if repairs are not performed and declared compliant by a road vehicle inspection agent within 48 hours.
Major defects
A major defect poses an immediate threat to the safety of the driver and other road users. A vehicle with a major defect is prohibited from being operated.
If you would like to receive an email alert (in French only) each time the Circle Check Guide is updated, you can subscribe to our mailing list by completing this subscription form.
